Results for1 automotive led testerfrom 15 Products.
|
IEC60598-1 Annex D Lamp Thermal Test Draught-proof Enclosure / LED outdoor light test windshield 1. Introduction Draught-proof enclosure is designed according to IEC60598.1 annex D...
|
|
|
|
CREE XHP50 XHP50.2 XHP70 XHP70.2 2nd Generation Cool White Neutral White Warm White LED Emitter 6V 12V with 16mm 20mm board About Cree LED The former LED products group of Cree is ...
|
|
|
|
10cm/ S Linear Speed Counter Led Display Safety Glove Cutting Tester (GW-099) Brief introduction: This tester is use to determine the protective capability of the safety glove ...
|
|
|
|
Quick Detail: With LED screen to display the battery SOC information including battery voltage, cpacity, current, etc good safety performance and wide working temperature range ...
|
|
|
|
ASMT-UWB1-ZX3C2 Chip LED ASMT-UWB1-Zxxxx OneWhite Surface Mount PLCC-2 LED Indicator Appication: Non-automotive use • General Signage backlighting • Amusement machine backlighting ...
|
|
|
|
Luminaire Adjustment Test Device Meet standards of GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000 Function: Applied to testing adjustment device with soft cable and wire built in ...
|
|
|
|
Brush or Sponge Pilling Tester GW-222 Application: Brush or Sponge Pilling Tester, to determine the pilling propensity and simulate normal wear of knitted and woven fabrics used in ...
|
|
|
|
FINISHED SHOE STIFFNESS TESTER(GW-160 ) Brief introduction: The tester used to test stiffness of the outsole.fix the toe part of finished shoe with a solid body by the fixture and ...
|
|
|
|
Hydrostatic Head Tester/Fabric penetration testing machine(GW-163) Brief introduction: Hydrostatic Head Tester, is used for determining the resistance of fabrics (canvas, coated ...
|
|
|
|
GW-049B Footwear Safety Shoes Compression And Puncture Testing Machine Resistance Tester •Brief introduction: This Machine is used to test the compression of safety footwear and ...
|
|
|
|
201007J0102T4E 2010±5% 1K 0603 SMD Chip Resistor application Consumer electronics Automotive electronics LED lighting Passive components RC0603JR-07100RL resistors 100 OHM 1/10W 5% ...
|
|
|
|
HSKT10 Mechanical Shock Tester Proposal Description 1 Product application The shock testing system of HSKT series are mainly applicable to shock resistance tests in such fields as ...
|
|
|
|
IEC 60529 IP5X6X Dust Test Chamber Environmental Tester Product Description Sand and dust test chambers are made for the simulation of dust and sand conditions.These test ...
|
|
|
|
UV Discoloration Meter/UV Anti-Yellow Testing Machine (GW-015) •Brief Introduction: This tester simulates the circumstances of sunshine radiation to test the resistance to ...
|
|
|
|
Safety helmet chin band strength lateral rigidity tester(GW-375 ) Brief introduction: The machine is designed with unique design and reliable performance. It is widely used in ...
|
|
|
You may also be interested in :