Augite and pyroxene mineral processing grinding mill
Augite is very dark green to black in color. The diagnostic feature
of any pyroxene is two cleavages that intersect at 89° or 91°.
Unlike the feldspars or hornblende, pyroxenes show mediocre
cleavages that are hard to spot.
Introduce Of Augite and pyroxene mineral processing grinding millAugite and pyroxene mineral processing grinding mill is for
super-fine grinding materials with hardness less than 6 in Moh‘s
scale and humidity less than 6 percent such as kaolin, limestone,
basalt, calcite, marble, talcum, barite, gypsum, dolomite,
bentonite mud, mica, pyrophyllite, sepiolite, carbon black,
diatomite, graphite, alunite, fluorite, potassium feldspar,
phosphorite, pigment, up to 200 kinds. The granularity (or final
size) of the finished products can be freely adjusted between
325-3000meshes (0.045-0.005mm), and the capacity (ton/hour) ranges
from 0.4T/H to12T/H depending on the final size and the grinding
materials.
Detailed Product Description about Augite and pyroxene mineral processing grinding millAugite and pyroxene mineral processing grinding mill is mainly
applied to grind non-inflammable, non-explosive and brittle
materials with Mohs’ hardness under six. Such as calcite, chalk,
limestone, dolomite, kaolin, gypsum, and talc etc, totally more
than 100 kinds of materials. Product fineness can be controlled
between 300~3000 mesh (47~5 micron)
Comparable with ball mill, Augite and pyroxene mineral processing
grinding mill has features of low cost, high capacity, easy
operation; Comparable with Raymond mill for coarse powder up to 325
meshes, it can produce fine powders between 47 and 5 microns (300
to 3000 meshes)
Features of Augite and pyroxene mineral processing grinding mill:1. High efficiency
Under the same final size and power, the product capacity of
Augite and pyroxene mineral processing grinding mill is twice than jet mill and agitation mill.
2. Longer lifetime of spare parts
The roller and ring are made of special material, which improve the
grinding efficiency a lot. For same material and final size, the
lifetime of its wearing parts can reach to more than one year,
about 2-5 times as long as that of vertical shaft impact crusher
and turbo-mill. Especially when handling calcium carbonate and
calcite, the lifetime can reach 2-5 years.
3. High safety and reliability:
There are no rolling bearings and bolts in grinding cavity, so
problems caused by bolts shedding or wear of bearings and seal
components will never happen.
4. High fineness of products
The product fineness can reach D97≤5m.
5. Environment friendly
The application of pulse dust collector and muffler reduce the
pollution and noise of the dust, which has reached national
environment protection standard.
Production Line Configuration of Augite and pyroxene mineral processing grinding mill:The whole set HGM Augite and pyroxene mineral processing grinding
mill consists of hammer crusher, bucket elevator, storage hopper,
vibrating feeder, main unit, inverter classifier, cyclone
collector, pulse deduster system, high pressure positive blower,
air compressors and electrical control systems
Working Principle of Augite and pyroxene mineral processing grinding mill:The main bearing and each dial are driven by electromotor of main
machine through reducer, and numbers of rollers, which are rolling
in the ring, are driven by dial through plunger. After crushed by
hammer crusher, the big materials become small ones and are sent to
storage hopper by elevator and further sent to the middle of first
dial evenly by the electromagnetic vibrating feeder and feeding
pipe. The materials will be driven to the edge of dial by
centrifugal force and fall down into the ring, crushed and grinded
by roller, and become powder after production of three rings. The
high pressure centrifugal blower will inhale air from outside and
blow the crushed materials to classifier. The rotating turbo in the
powder concentrator will make the coarse powder return to the mill
and reground, while the fineness will mix with the air and go into
the cyclone and be discharged in the discharge bin, which is at the
bottom of it. The air, which mixed with very little fineness, will
be purified by impulse duster and discharged by blower and muffler.
Model and technical data of Augite and pyroxene mineral processing grinding mill:Model | HGM80 | HGM90 | HGM100 | HGM100A | |