Glass Machinery Co., Ltd |
PMV-FB bottles Appearance inspection machine is our company from
Japan, Ltd. as the S & P to hi original introduction, the
Chinese market, general agent, the device has incomparable
superiority to other similar devices.
A device composed of
The device is broadly divided into bottle and the bottle the
Department of the Ministry of detection of detection of two parts,
the Ministry of bottle composed of eight high-speed camera, the
main plane of the lack of detection of mouth meat, cracks, thin,
bubble and thread the Ministry of lack of meat, cracks, bubbles and
so on, bottle Department also has eight high-speed camera composed
of mainly non-transparent foreign body detection, black spots,
stones, bubbles, vertical degrees, oval and so on.
2 Test Principle
The device of the bottles for non-contact type detection, the first
landing of eligible products, is to do you think is a good bottle
inspection machine through the various testing areas, so that test
machine to a good bottle for image input and data processing
(popular speaking, was recorded in live in his appearance), log the
number of not less than 200 bottles, of course, a good bottle of
the standard defined by your own, it shows the device detected a
human face. After login, so that the bottle need to detect the
normal through the inspection machine, when the bottles by
detecting areas, a number of high-speed camera shutter bursts from
different angles in order to gain a large number of multi-angle
image, and these image data through the driver-specific procedures
for high-speed processing and log on qualified product data to
compare them and make defect detection. The aircraft detection
speed up to 250 bottles per minute.
3-for-production adjustment
The most prominent advantages of the device is easy to operate,
easy to adjust. Each test station is fixed, without a single
adjustment, change their production, just the camera sets the whole
height adjustment can be, the entire adjustment takes about two ten
minutes down time, and testing before the test off the bottle, only
the need to replace the previous saved file can be opened without
re-login.
Four basic parameters
Input Power: AC220V 5A (need to ground)
Air Source: 4kg / m
Use of the environment: temperature 15 ~ 50
Humidity 35 ~ 85 (no condensation)