Home Companies Shenzhen Nufiber Systems Technology Co., Ltd.

10km 1310nm 25G SFP28 Transceiver Dual Fiber Single Mode SFP28-25G-LR

Active Member

Contact Us

[China]

Address: 4/F, Building C, Weihao Industry Park, No.1026, Songbai Road, Xili Town, Nanshan District, Shenzhen, China. 518055

Contact name:Hilary Lin

Shenzhen Nufiber Systems Technology Co., Ltd.

10km 1310nm 25G SFP28 Transceiver Dual Fiber Single Mode SFP28-25G-LR

Country/Region	china
City & Province	shenzhen
Categories	Other Surveillance Products

Product Details

25Gb/s SFP28 Transceiver SFP28-28G-LR dual fiber singleimode 10km 1310nm LC DDM

Description

The NuFiber SFP-25G-LR is is a single-channel, pluggable, fiber-optic SFP28 transceiver module for 25G Ethernet and InfiniBand EDR applications. It is a high performance module for short-range data communication and interconnect applications which operate at 25.78125Gb/s up to 10km. This module is designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC receptacle. This module incorporates Gigalight Technologies proven circuit and technology to provide reliable long life, high performance, and consistent service.

Features

Hot-pluggable SFP28 form factor
Supports 25Gbps data rate
Maximum link length of 10km
1310nm DFB laser and PIN photo-detector
Internal CDR on both Transmitter and Receiver channel
Duplex LC receptacle
Single 3.3V power supply
Power dissipation < 1W
Digital diagnostics functions are available via the I2C interface
RoHS-6 compliant
Commercial case temperature range: 0°C to 70°C

Applications

25GBASE-LR Ethernet

Optical Parameters

Parameter		Symbol	Min	Typical	Max	Unit	Notes
Transmitter
Data rate		BR		25.78	28.05	Gbps
Centre Wavelength		λc	1295	1310	1325	nm
Spectral Width (-20dB)		σ			1	nm
Average Output Power		Pavg	-1.5		2	dBm
Optical Power OMA		POMA	-6.4		3	dBm
Extinction Ratio		ER	3.5			dB
Differential data input swing		VIN,PP	180		700	mV
Input Differential Impedance		ZIN	90	100	110	Ω
TX Disable	Disable		2.0		Vcc	V
TX Disable	Enable		0		0.8	V
TX Fault	Fault		2.0		Vcc	V
TX Fault	Normal		0		0.8	V
Receiver
Data rate		BR		25.78		Gbps
Centre Wavelength		λc	1295	1310	1325	nm
Receiver Sensitivity (OMA)		Psens	-	-	-13.0	dBm
Receiver Power (OMA)					-13	dBm
LOS De-Assert		LOSD			-12	dBm
LOS Assert		LOSA			-13	dBm
LOS Hysteresis			0.5			dB
Differential data output swing		Vout,PP	300		900	mV
LOS		High	2.0		Vcc	V
LOS		Low			0.8	V

Ordering information

Part Number	Rate(bps)	Wave(nm)	Cable Type	Interface	Reach	Optical Components
25G SFP28
SFP28-25G-SR	25G	850nm	MMF	LC duplex	100m	VCSEL 850nm
SFP28-25G-LR	25G	1310nm	SMF	LC duplex	10km	DFB 1310nm
100G QSFP28
QSFP28-100G-SR4-S	103.1 Gbp	850nm	MMF	MTP/MPO-12	100m	VCSEL 850nm
QSFP28-100G-LR4-S	103.1 Gbp	1310nm	SMF	LC duplex	10km	DML 1310nm
QSFP28-100G-PSM4-S	103.1 Gbp	1310nm	SMF	MTP/MPO-12	500m	4x DFB
QSFP28-100G-SM-SR	103.1 Gbp	CWDM 1271~1331nm	SMF	LC duplex	2km	DML CWDM
QSFP28-100G-eCWDM4-S	103.1 Gbp	CWDM 1271~1331nm	SMF	LC duplex	10km	DML CWDM
QSFP28-100G-ER4L-S	103.1Gbps	1310nm	SMF	LC Duplex	25km-40km	4x EML
100G CFP/CFP2/CFP4
CFP-100G-SR10	103.1 Gbp	850nm	MMF	MTP/MPO-24	150m@OM4, 100m@OM3	10x VCSEL
CFP-100G-LR4	103.1 Gbp	1310nm	SMF	LC duplex	10km	4x DFB
CFP-100G-ER4	103.1 Gbp	1310nm	SMF	LC duplex	40km	4x DFB
CFP2-100G-SR10	112Gbps	850nm	MMF	MTP/MPO	300m@OM3, 400m@OM4	10x VCSEL
CFP2-100G-LR4-D	112Gbps	1310nm	SMF	LC duplex	10km	4x DFB
CFP2-100G-ER4	113Gbps	LWDM (1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm)	SMF	LC duplex	40km	4x DFB
CFP4-100GBASE-LR4	112Gbps	1310nm	SMF	LC duplex	10km	4x DFB